Skip to main content

Dixon® GM3 Boss Pipe Nipples, Spud, 1/2 in, MNPT, Steel, Domestic

Selected Dixon_GM3.jpg
Dixon_GM3.jpg

Features

  • The spud part of the coupling serves as one half of the boss ground joint connection and is usually fixed to the equipment
  • The stem part that is clamped to the hose is the other half
  • The two halves are connected or disconnected by rotating the wing nut on the spud, when connected they achieve both a mechanical and a pressure seal
  • Easy to seal
  • Boss couplings supply a convenient threaded fitting to connect two lengths of hose, or a single length to a male or female threaded outlet
  • Positive metal-to-polymer seal
  • Use with boss ground joint fittings
  • Leakproof seal forms when the metal head of the stem makes contact with the patented polymer seat in the spud
  • The non-metallic polymer seat resists most chemicals found in manufacturing facilities
  • Recommended for steam service up to 450 deg F
  • Worn-out hose couplings can be dangerous
  • They should be checked regularly and replace when necessary
  • Each coupling user should review applications and add safety devices where indicated
  • Note: pressurized steam is an extremely dangerous commodity
  • Only hose, fittings, clamps and accessory items that have been approved for steam service should ever be used! never use an unapproved item for steam service
  • Always follow the manufacturer's product recommendations for pressurized steam handling
  • Warning: this product contains a chemical known to the state of California to cause birth defects or other reproductive harm
  • Do not use in connection with drinking water
  • Wash hands after handling

Resources

Related Items

Recently Viewed Items

Description

Dixon®, GM3, Pipe Nipples, Series: Boss, Fitting/Connector: Spud, 1/2 in Nominal, MNPT End Style, 1-5/16 in Hex, 1-7/8 in Length, Steel, Plated, Domestic