Skip to main content

Dixon® GM8 Boss Pipe Nipples, Spud, 3/4 in, MNPT, Steel

Selected Dixon_Valve_Coupling_GM8.jpg
Dixon_Valve_Coupling_GM8.jpg

Features

  • The spud part of the coupling serves as one half of the boss ground joint connection and is usually fixed to the equipment
  • The stem part that is clamped to the hose is the other half
  • The two halves are connected or disconnected by rotating the wing nut on the spud, when connected they achieve both a mechanical and a pressure seal
  • Positive metal-to-polymer seal
  • Boss couplings supply a convenient threaded fitting to connect two lengths of hose, or a single length to a male or female threaded outlet
  • Easy to seal
  • Boss couplings are all-purpose hose couplings, universally recommended for steam hose connections, they are also widely used for air, water, fluid petroleum, chemicals and liquid petroleum gas up to 1 in ID
  • Boss couplings can be applied to many types of rubber, synthetic, plastic, metallic or semi-metallic hose
  • Worn-out hose couplings can be dangerous
  • They should be checked regularly and replace when necessary
  • Each coupling user should review applications and add safety devices where indicated
  • Note: pressurized steam is an extremely dangerous commodity
  • Only hose, fittings, clamps and accessory items that have been approved for steam service should ever be used! never use an unapproved item for steam service
  • Always follow the manufacturer's product recommendations for pressurized steam handling
  • Warning: this product contains a chemical known to the state of California to cause birth defects or other reproductive harm
  • Do not use in connection with drinking water
  • Wash hands after handling

Resources

Related Items

Recently Viewed Items

Description

Dixon®, GM8, Pipe Nipples, Series: Boss, Fitting/Connector: Spud, 3/4 in Nominal, MNPT End Style, 450 deg F, Steel, Plated, 3-9/16 in W x 4-15/16 in H Dimensions