Skip to main content

Hannibal 45812EL 458EL Extended Length Material Specific Chucking Reamer, 0.3471 to 0.378 in Dia x 7-1/32 to 14 in OAL, 0.3105 in Dia Straight Shank, Straight Flute

Selected Hannibal_41606EL.jpg
Hannibal_41606EL.jpg

Features

  • The reamer is used to finish machine a previously formed hole to an exact diameter with a smooth finish
  • Carbide tipped reamers are especially appropriate for close tolerance reaming - because carbide is very highly resistant to wear, the reamer will produce accurate hole size and a smooth finish far longer than high speed steel or cobalt
  • The reamer is an end cutting tool, cutting only on the chamfer's edge at the outside diameter of the preformed hole
  • The standard 45 deg chamfer angle provides effective cutting action for most materials
  • Higher feeds and speeds due to heat resistant cutting edge - reduces machine cycle time per part
  • Consistent quality - maintains hole size and surface finish far longer
  • Longer tool life - reduces down time for tool changes
  • Tool geometry and carbide grade appropriate for material being machined
  • Carbide tips brazed to tough hardened alloy steel body
  • Polished flutes for easy chip flow
  • Precision ground cutting edges
  • Excellent in large production runs due to material specific carbide and tool geometry
  • Provided with controlled shank

Related Items

Recently Viewed Items

Description

Hannibal Chucking Reamer, Extended Length Material Specific, Series: 458EL, 0.3471 to 0.378 in Diameter, 7-1/32 to 14 in Overall Length, Straight Shank, 0.3105 in Shank Diameter, 4 Flutes, Straight Flute, 1-3/4 in Flute Length, Carbide Tip/Steel Body, Polished, Applicable Materials: Cast Iron, Steel and Non-Ferrous Metal