Skip to main content

Hannibal 45912 459F Material Specific Chucking Reamer, 3/8 in Dia x 7 in OAL, 0.3105 in Dia Straight Shank, Straight Flute

Selected Hannibal_41406.jpg
Hannibal_41406.jpg

Features

  • The reamer is used to finish machine a previously formed hole to an exact diameter with a smooth finish
  • Carbide tipped reamers are especially appropriate for close tolerance reaming - because carbide is very highly resistant to wear, the reamer will produce accurate hole size and a smooth finish far longer than high speed steel or cobalt
  • The reamer is an end cutting tool, cutting only on the chamfer's edge at the outside diameter of the preformed hole
  • Geometry and carbide grade appropriate for material being machined
  • Higher feeds and speeds due to heat resistant cutting edge - reduces machine cycle time per part
  • Consistent quality - maintains hole size and surface finish far longer
  • Longer tool life - reduces down time for tool changes
  • Excellent in large production runs due to material specific carbide and tool geometry
  • Type "C" with short carbide tip
  • Carbide tip brazed to tough hardened alloy steel body
  • Polished flutes for easy chip flow
  • Precision ground cutting edges
  • 1-3/4 in L carbide
  • The standard 45 deg chamfer angle provides effective cutting action for most materials
  • -0.001 in shank diameter tolerance
  • 0.0002 in tool diameter tolerance

Related Items

Recently Viewed Items

Description

Hannibal Chucking Reamer, Material Specific, Series: 459F, 3/8 in Diameter, 7 in Overall Length, Straight Shank, 0.3105 in Shank Diameter, 4 Flutes, Straight Flute, 1-3/4 in Flute Length, Carbide Tip/Steel Body, Polished, Applicable Materials: High Temperature Alloy and Steel