Skip to main content

Hannibal 63021 630F Material Specific Taper Length Drill, 21/64 in Drill - Fraction, 0.3281 in Drill - Decimal Inch, 6-1/2 in OAL, Tool Steel

Image asset. Press spacebar to set to main image.

Features

  • Drills are end cutting tools used to produce holes when rapid removal of material is desired
  • Twist drills are generally effective in holes up to 3 tool diameters deep - peck cycles should be used for deeper holes to achieve better chip evacuation
  • Longer flute and overall lengths than jobbers length drills
  • Carbide tip high temperature brazed to hardened tool steel body
  • Smooth flutes for effective chip flow
  • Precision ground to insure concentricity of tip and body
  • The longer length of these drills increases their effective reach through drill bushings
  • For use in ASA split sleeve drill drivers

Related Items

Recently Viewed Items

Description

Hannibal Taper Length Drill, Material Specific, Series: 630F, 21/64 in Drill - Fraction, 0.3281 in Drill - Decimal Inch, 6-1/2 in Overall Length, 4-1/8 in Cutting Depth, Spiral Flute, 4-1/8 in Flute Length, Straight/Tanged Shank, 118 deg Point, Standard Point, Carbide Cutting Edge, Tool Steel, Applicable Materials: Cast Iron and Non-Ferrous Materials